Stihl MS261 C-M

The legendary MS 261 professional chain saw is now available with M-Tronic™ – STIHL’s electronic engine management system for optimum engine power at all times – and is part of STIHL’s new generation of fuel-efficient and low-emission chain saws. It features stratified scavenging technology that cuts fuel consumption by 20% and exhaust emissions by 50% compared to its predecessor (MS 260), in addition to the new long-life air filtration system, patented captive nuts on the sprocket cover and side-access chain tensioner. This unit also includes anti-vibration technology and a stainless steel muffler in a durable magnesium crank case, making this trusty, efficient saw a leader in the market.

SPECIFICATIONS

FEATURES

• STIHL M-Tronic (M)

  Fully electronic controlled ignition timing and fuel metering system. The engine management STIHL M-Tronic (M) system ensures optimum engine performance, constant maximum speed and excellent acceleration. Manual carburetor adjustments are not necessary.

   

• STIHL anti-vibration system

  Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

   

• Reduced-emission engine technology

  2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

   

   

• Advanced combustion technology

  Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

   

   

• Pre-separation air filtration system

  STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

   

   

• STIHL ElastoStart

  Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

   

   

• Tool free fuel caps

  Special caps to open and close the tank cap quickly, easily and without tools.

   

   

• Decompression valve

  The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

   

   

• STIHL Ematic System

  Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

   

   

• Side-mounted chain tensioning

  The tensioning screw can be found on the side of chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.

   

   

• Controlled-delivery oil pump

  The exact chain oil output can be adjusted manually for varying conditions, allowing for a reduction of up to 50%.

   

  Please note product images, specs and other information provided may change at any time without notice and may not reflect the units in stock at dealer location. We pride ourselves on working with companies who are constantly researching and developing better products and as such specs may change with little or no notice.